Load Balancing Information

• Load Balancing Information
• Load Balancing Videos

Network load balancing ?
i have installed Administrative Tools for windows 2003 " adminpak " on windows xpI want to configure it , this machine act as server internet gateway for 100 PCs .I have 2 Adsl line .i connected every adsl to ethernet adpter in the server . all network connected to the third ethernet adpterso the server have 3 connections.i want all network PCs to be connected to two adsl lines , and if one line disconnected and other one work...so i should use Administrative Tools for windows ....but i dont know how to configure it.anybody help plzthe three connection are adsl1 ip address 84.36.64.101 255.255.255.248adsl2 ip address 84.36.47.44 255.255.255.248lan ip address gateway for PCs 10.10.10.10 255.0.0.0

Two wireless routers, one computer. How do I do load balancing?
Hey guys, I currently have access to two wireless routers with both a seperate bandwidth of roughly 7Mbps Connected to different WANs . How could I connect both of them simultaneously to my computer with a single wireless card with a limit of 54Mbps in order to have a total download speed of 14Mbps? Is it even possible? If so, how do I do it any OS .Also, I want to be able to do WIRELESS load balancing.

Does windows vista/7 do network load balancing?
If you have multiple network adapters active wifi wired ethernet , will windows automatically balance the traffic load? OR is it more efficient to have only one adapter active?

Can Windows Xp do load balancing?
I have two wireless internet connections, is there any way to load balance them under XP, even by using a third party software?

How to do load balancing?
I need to do load balancing but from 2 locations I have servers colocated in Asia and another set colocated in US . Visitors from nearer to Asia will be served from my Asian location and visitors nearer to US will be served from the US location . Also, if either of my locations are fully loaded, the other location will take over. I will need some point to point connections to both locations and some data replication for sure as my application is dynamic, but what else do I need? Please advise

How can we set up the load balancing in web servers?


How to make load balancing gateway in Linux for two ISPs?
I just want to know is there any distro of linux in GPL that provides load balancing solutions in two ISP connections. I found one " Clark Connect" but that is charging 75$ per year.

How do I configure load balancing and failover internet connection on my pc?
I have 2 internet connections from 2 different ISP. Is there a possibility for me to configure load balancing and failover internet connection on my pc? My pc has XP sp3 professional as operating system. I also have 1 wireless NIC installed. Please if it is possible, please tell me how to go about it or point me to websites were I can get further information.

How to configure network load balancing?
when we configure the network load balancing on a computer then we are not able to connect to another computer from itit doesnt ping to anyone. and we cant add more servers to cluster. what should we do. we are using only one NIC

How to configure load balancing on cisco 1811 router on unequal links with local area network behind nat?


Domain Controller Cluster, Exchange, Network Load Balancing, Active Directory, Global Catalog, DNS, DHCP, ISA?
Is this doable?2 domain controllers DC1 and DC2 in a cluster with Microsoft Server 2003 EnterpriseMicrosoft Exchange 2003 EnterpriseNetwork Load BalancingActive DirectoryGlobal CatalogDNSDHCPISAAre there any issues with running all of these services on a cluster of 2 machines?Does the NLB Network Load Balancing work on the machines it is installed on? as in will it direct traffic to DC1 or DC2 depending on the individual server load or does the NLB need to be done before the cluster such as a hardware load balancing device?What I am after is a configuration where If a machine fails the system continues working fine. Another machine can be added to the cluster say after a few years I want to upgrade the machines. I want to be able to take one offline and replace if with a new machine with better specs let it replicate then take the other offline and do the same . Each machine is being used so one machine is not just sitting there waiting for the other to fail hence why I want to use NLB .The reason I ask is that I want a solution that has minimal points of failure if I have to use another server for ISA and one for Exchange etc then I need to have another solution for each of them if one was to fail. Where as having it all on one machine and having it in a cluster means that if one fails everything continues working. I not worried about resources or storage restraints I could run 4 servers in the cluster if needed I just want to know the negatives of running these on one machine such as how running ISA on a DC is less secure.

Load balancing with 2 nic?
my system config nic 1 172.30.1.5, 255.255.255.240, 172.30.1.1nic 2 172.30.1.150, 255.255.255.240, 172.30.1.151 each nic have connected with 2 E1 lines 2mbps indipendently, and destination of both E1 lines are same network same ip 172.30.1.10 ftp server , when i send file using FTP it send with 2mbps speed only. i want 4mbps transfer speed at a time. is possible to load balancing the nics? plz help me?

Load-Balancing HELP??
Okay I know this is when you use either software or hardware to speed of serving web pages. My only question about it is see I have 2 computers one with internet and it has a web server on it, but say I wanted to use my other computer with load balancing what do I do? See i just want software load balancing BUT HERE IS THE THING how is the CHEAPEST way to get internet on a bunch of computers so that my upload speed can be higher for people?

Load balancing?
I have an ASP.NET 2.0 application that is supposed to have lots of users probably connected at a specific period of time simultaneously. I would like to know how I can apply load balancing to the network that will serve my application to share the traffic between the several servers that will serve my application. I have found some articles about clustering but I have no idea about it. What kind of softwares or hardwares are required?